DRS-27T

DRS-27T

Available with 3 or 6 Zone IR Preheaters

Large Board /Component SMT Rework
Massive, Thermally Challenging Boards are Processed with Powerful & Robust Heating
Mutiple Field of View Vision System,70mm(Standard) or 125mm(Optional),and 18 Micr

聯絡我們

Features/Benefits:

Repeatable Thermal Performance
Closed-Loop Temperature + Flow Rate = Total Closed-Loop Heating

UPPER HEATER:
• 2000 watt high efficiency (patented) with PID control
• Integrated cool air bypass reduces package temperature and controls joint

time over reflow.
• Mass flow controller regulates precise heat flow (accuracy and linearity

+/-1% repeatability , .1% full scale).

• Calibration controls for temperature and flow rate at multiple set points.
• Thermocouple-based stabilization takes in to account the thermal mass of

the heating system to refine heat output to component.

BOTTOM HEATER:
• Radiant IR panel bottom heater (high thermal uniformity), based on black

ceramic high emissivity coating, dramatically increasing radiant energy.
• Preheat of board is temperature-based via IR temperature sensor of

thermocouple
• Integrated automatic pcb and machine cooldown system; insures operator

safety handling pcb, brings system back to initial conditions for process
repeatability and aids in controlling joint time over reflow.
• Integrated pop-up pcb supports, pcb expansion control, and flexible

position pcb edge supports

 

 

 

 

DRS27T.6Z System

DRS27T.6Z
6-Zone Preheater, click to enlarge.

 

DRS27 Preheater

   
   


Multiple Field of View Vision System
Provides Enhanced, Accurate, Quick & Easy Viewing
• Field of view: 70mm; 125mm (optional)
• Nine (9) position viewing; four (4) corners, four (4) sides, and center
• High magnification is programmable or operator adjustable to enhance

placement accuracy and to minimize operator interpretation. Motorized
joystick control for quick and easy adjustment.
• Independent intensity for component (green) and board (white) to provide

clear, fast, and accurate alignment

 

 

 

 

   
   

Closed-Loop Automation
Promotes Simple, Fast, Non-Operator Dependent Process Control
• Force placement control: load cell indicates actual (real-time) and target
setting (20-2000 grams).
• Programmed z and vision axis: component placement, pickup, flux/solder

dipping and drop off.
• Motorized joystick theta and z axis control for quick and easy component

alignment
• Vacuum sensor control: activates automatic component removal

(eliminating solder squeeze out) and to monitor/maintain non-contact
tip height for site cleaning.
• Temperature-based preheat: regardless of machine or board conditions,

the non-contact IR sensor triggers when preheat setting is reached and
monitors throughout the process.
• Modular software enables rapid implementation of complex motion, vision

and process controls.

 

     
   

Proprietary Site Cleaning
Non-contact vacuum removal
• Vacuum sensor automatically and continually adjusts tip height and
compensates for variable residue solder volume.
• Closed-loop hot gas heats pads after component is removed.
• Non-abrasive, composite vacuum tip safely removes residual solder.

Eliminates damage to pads and solder mask caused by contact-based
methods.
• Micro components utilize micro contact tips without affecting adjacent

dense area.


>Download Site Clean Tool Literature

 

 

   
   


Micro Component Rework & Site Cleaning Kits
Precision Rework in Four Simple Steps!
• Removal, Site Clean, Apply Solder Paste, and Component Replacement
• Kits available for various Ultra Micro and Micro Components

• Component specific Micro Tips for precision process operations

 

 

   
   


Custom Nozzle Design
Engineering design is critical to thermal process control
• Standard nozzles for conventional components
• Special nozzles for special attention to thermal control, joint temperature

uniformity, limitation of heat to device or sensitive areas and production
concerns. Air-Vac has designed and manufactured thousands of nozzles for
BGA's, 01005's, connectors, QFN's, sockets, and more.

 

 


 

   
   


Auto Profiling Software
Automatic, easy one pass thermal profiling
• Simply set the target temperature and go.
• Preheat, soak, ramp, reflow, and cool down events are automatically run.
• After the profile is complete, then entire rework process (removal, site

cleaning, replacement) is built automatically and ready to run.

 

     
   

Life of Equipment Support
Free phone support and software upgrades
• Our ongoing technical service and process support is a major
value-added part of our total product offering.

 

       
   

DRS27 Systems Include:
• DRS27T.6Z Board Carrier: 32 1/2" x 50"
• DRS27T.6Z IR Preheater: 6-zone, 15000 watt, 32" x 24", Adjustable Height

• DRS27T.3Z Board Carrier: 21 1/2" x 50"
• DRS27T.3Z IR Preheater: 3-zone, 7500 watt, 16" x 24", Adjustable Height

• Top Heater: 2000 watt
• Motorized Z-Axis and Theta Control, Vision Axis
• Topside Clearance: 70mm (2.75")
• Bottomside clearance: 26-45mm (1-1 3/4")
• Programmable Board Cooling System
• Nozzle "Cool Air" Injection
• Desktop Computer (Windows 7), Monitor, Keyboard, Mouse
• Thermal Tutor Software with Automatic Profile Build Function
• Green/White LED Vision with Independent Top & Bottom Adjustment
• Closed-Loop Air/Gas Adjustment using Mass Flow Controller
• Real-Time Force Placement
• 8 Programmable Thermocouple Channels
• Maintenance and Verification

 

       
   

Options
125mm Vision #0027.10.041
• Increases Field of View to 125mm (from the standard 70mm)
• Nine (9) position viewing: four (4) corners, four (4) sides, and center
• High magnification is programmable or operator adjustable to enhance

placement accuracy and to minimize operator interpretation. Motorized
joystick control for quick, easy adjustment.
• Independent intensity for component (green) and board (white) to aid

in clear, fast, and accurate alignment.

 

 


 

   
   

Set of Standard Nozzles #NTSTD
• Includes 14 nozzles in sizes 5mm to 44mm square.

 

 

 

 

   
   

Pivoting IR Sensor with Laser Pointer #0029.11.041
• Provides process repeatability by insuring that the board is at the exact
same target temperature each time before localized reflow begins.
• The non-contact temperature sensor monitors topside board temperature

and automatically triggers the localized reflow process once the target
is reached.

• The sensor spot size is .5"

 

 

DRS27 IR Sensor

 

   
   

Pyrometer with Fine Laser Pointer #027.23.043
• Same benefits as #0029.11.041 IR Sensor with the following
enhancements.
• The sensor spot size is .16". The spot is not effected by height to the pcb.

Reduced reading area by 84% allows for more accurate pcb measuring
without interference of densely populated assemblies.
• The laser pointer is incorporated in the pyrometer, providing a direct target.

 

 

 

   
   

Component Rework & Site Cleaning Kits >
• Precision Rework in Four Simple Steps!
• Removal, Site Clean, Apply Solder Paste, and Component Replacement
• Kits available for various Ultra Micro and Micro Components

 

 

 

 

   
   

Universal Insertion Tool #AU6LGA47R
• Mechanically self-centers any device for accurate pick up.
• Used in conjunction with Vision System Component Shuttle.
• Component range 6-47mm

Universal Insertion Tool #AU6LGA100R
• Same as above except with a component range of 6-100mm

 

 

 

   
   

Direct View Camera System #0025.03.010
• Provides operator with magnified viewing for component alignment or
reflow at board level.
• Camera adjustments include focus, zoom, and apeture.
• Includes camera/zoom lens, fiber optic lighting, 20" monitor, and

boom stand.

 

 

 

   
   

Hot Gas Spot Heater
• 3500 watt bottom side convection heating system directs heat to the
specific component area within 3 feet of board.
• Reduces topside heating for extremely sensitive topside component

temperature.

 

 

DRS27 Spot Heater1

 

   
   

Dippable Solder Paste/Flux Applicator Kit #FASET1
• Stainless steel fluxing pedestals with precision-machined depth provides
controlled application of solder or tacky flux directly to the solder
spheres on the device.
• Includes 10 pedestals ranging from .001" to .015" depth
• Used in conjunction with the Component Shuttle.


>Download Literature

 

 

   
   

Paste-On-Stencil Adapter #0024.24.111
• Component specific micro stencil applies solder directly to the component
spheres.
• Pasted device in stencil is placed in micro stencil adapter, used in

conjunction with the Component Shuttle to pick the pasted device.

 

 

 

   
   

Fume Extraction Manifold & Hose Assembly #1020.01.040
• Removes flux vapors from the work environment for operator health
and safety.
• Requires connection to central exhaust system or dedicated air

purification system.

 

 

 

 

   
   

Recommended Spare Parts #0027.00.011
• Includes heater element, site clean vacuum filter, vacuum tubing,
and heater air filter.

公司簡介

帝仕高國際有限公司(Dynamite International Corp.)簡稱DIC,成立於西元1994年,以經營電子產業設備之銷售,技術服務與製程支援為基礎,進而提供客戶專業專精之生產設備及完整的產線規劃之公司。...

Read more